Solder Wires

Indium Corporation manufactures a broad range of solid and flux-cored solder wire. Available in several diameters, several alloys and high to very low flux %.

No clean flux cored wire
Product name Description
CW-807 Best-in-class soldering performance
Low smoking and very low spatter
Clear residue
For use in both Pb-free and SnPb wire
CW-802 Low smoking and very low spatter
Clear residue
For use in both Pb-free and SnPb wire
Halogen Free
Water soluble flux cored wire
Product name Description
CW-301 Optimized for use with Sn/Pb and Pb-free
Excellent cleanability with cold water
Fast and excellent wetting to common Pb-free surface finishes
Minimal spattering and low odor

 

Rework Fluxes

Indium Corporation manufactures a rework fluxes as Liquid Flux Pens and TacFlux™.

Liquid flux pens
Product name Description
FP-500 No Clean
Halogen Free
Passes SIR unactivated
Compatible with Sn/Pb and with Pb-free solder alloys
Packaged in convenient flux pen dispensers
No over-fluxing of surface and no waste
NC-771

No Clean

Packaged in convenient flux pen dispensers

Backwards compatible with eutectic Sn/Pb

Excellent wetting
Passes SIR unactivated
Compatible with eutectic Sn/Pb and with Pb-free solder alloys
No over-fluxing of surface and no waste

FP-300 Water Soluble
Packaged in convenient flux pen dispensers
No over-fluxing of surface and no waste
TacFlux™ (viscous fluxes)
Product name Description
TacFlux™ 020B

No Clean
Halogen Free
Passes SIR unheated
Compatible with NC-SMQ92J, Indium 5.8LS and Indium 8.9 series

TacFlux™ 010
Halogen Free
Ultra low post reflow residues
Compatible with NC-SMQ75
TacFlux™ 089HF
Excellent soldering and thermal stability
Eliminates HIP
Compatible with Indium 8.9 Series
Halogen free
TacFlux™ 012
Compatible with NC-SMQ80 and Indium based alloys
TacFlux™ 057
Compatible with Indium 5.7LT and Bismuth based alloys
TacFlux™ 025
Excellent wetting with all common solders and surfaces
Compatible with all water wash Indium solder paste
TacFlux™ 007
Compatible with gold-tin solder alloys. ROL1

TacFlux™ can be used for rework, SMT component attach (including BGAs), preform soldering and for any application that requires a viscous flux.

One applied No-Clean fluxes may be left for hours before reflow without loss of soldering ability; however, water soluble fluxes should not be left in high humidity (>60%RH) for longer than one hour.

All TACFluxes pass J-STD-004 reliability testing