Wandres

Supplier web site Quick Access CTS French Page

The German company WANDRES was created in 1981. 

In 1982, at BASF demands,  WANDRES created their first cleaning machine to clean video tapes.

 

WANDRES WAY OF CLEANING

 
  • The brush is slightly wetted by the Ingromat liquid (0,3 to 0,6 liters per hour).

  • The wet phase does eliminate electrostatic charges on the surface of the material to be cleaned.

  • The particules are trapped by capillarity on the brush fibers.

  • Particules are then transported outside of the material, outside the area which was cleaned.

  • Brush fibers are dryed out, rotative scrappers tears off the particules wich are sucked up and eliminated by an industrial vacuum unit over a Æ 60 or 80 mm suction pipe.

  • The brush itself is therefore automatically self cleaned and can start the material cleaning cycle safely.
  • Different fibers are available depending on the process, 17 to 50 mm length, 0,08 to 0,40 mm fiber diameter.
 
  • The surface to be cleaned is never wetted by the Ingromat process,
  • If the cleaning is made on steel or metal plates with oil, Ingromat process is not used,
  • Different type of Ingromat product are available depending on the next customer process applied after the cleaning of the parts.
 

Since then, several type of equipment for cleaning using Ingromat and vacuum have been installed in many many differents industries :
  • Printed Circuit Board, hybrids,
  • Electronics, cleaning before dry film lamination, after dry film lamination, before optical inspection, before packing,
  • Plastic sheet, plastic films, reel to reel,
  • Paper and cardboard,
  • Printing industry, before screen printing, before ink jet printing, before thin layer coating, before packing, after punching,
  • Ceramic, 
  • Textile, 
  • Metal in sheet or in web, before dressing, before winding, before stacking, before stamping, before painting,
  • Wood, panels before stacking, before varnish, before laquering, before packing, before optical inspection,
  • Furniture's,
  • Glass, before refiring, before screen printing or printing, before optical control,
  • Cleaning sheet by sheet or reel to reel for thin materials, 
  • Car body cleaning before painting with cleaning devices mounted on robots,

A wide range of equipments are available:

  • CF 05 : Cleaning equipment with integrated driven conveyor,
  • SwordBrush : Cleaning device to be installed in customer conveyor systems or a reel to reel system,
  • Suction guns, tornado nozzles, mix blowing / suction guns.

 

 
Envoyez un courrier électronique à webmaster@chimietech.com pour toute remarque concernant ce site Web.
Copyright © 2001 - 2010 CHIMIE TECH SERVICES - Version 3.5.0 -  Dernière modification : 17 août 2009