• Input format IPC-D 356A et IPC-D 356 + NTD (data file and object file are readable).

• Data analysis,

• Data manipulation,

• Creation of fixture building drill files,

• Creation of electrical test part program for universal grid tester or flying probe testers,

• Creation of object files for the CAR II verification software.

• Identical to ADAM II but support more input formats :

  • Gerber,

  • Extended Gerber (X-Gerber),

  • Dpf,

  • Drill data's,

  • Mask data's.

• Allows the visualization of the printed circuit board on a PC screen (including inner layers) and to localize the open or the short detected by the tester during the electrical test.

• The display is made :

  • Automatically from the error file created by the electrical tester,

  • Semi-automatically by using a bar code reader to scan the error label printed by the electrical tester,

  • Manually by entering through the keyboard the fault coordinates,

Thos three softwares are working over Solaris version 2.6 or higer or over WIndows NT4 or higher.

Envoyez un courrier électronique à webmaster@chimietech.com pour toute remarque concernant ce site Web.
Copyright © 2001 - 2008 CHIMIE TECH SERVICES - Version 3.3.0 -  Dernière modification : 13 février 2006