| Supplier Web Site |
Quick Access |
Page Web CTS en Français |
|
|
|
|
The
French company AUTOMA-TECH was created in 1991 and is one of the leaders
in terms of exposure units.
Since
then, AUTOMA-TECH never stopped developing new equipments for the
printed circuit boards manufacturing :
-
Handling
equipments.
-
Inner
layers punching machine.
-
Automatic
exposure units.
-
Laser
direct imaging system (LDI).
-
Measurements
equipment.
-
Semi-automatic
exposure units.
CTS
is the distributor in France for semi-automatic exposure unit and measurement
equipments only :
|
Product |
|
Equipment type |
| Afosa
Ca5 |
|
Semi-automatic
collimated light 1 x 5 kW with automatic optical registration with CCD
cameras. |
| |
|
|
| Asa
Ca5 |
|
Semi-automatic
collimated light 1 x 5 kW. |
| |
|
|
| Asa
Sa8 |
|
Semi-automatic
scattered light 2 x 8 kW air cooled. |
| |
|
|
| Asa
Sw7 |
|
Semi-automatic
scattered light 2 x 7 kW water cooled. |
| |
|
|
| Icm
200 |
|
Table
type equipment for manual measurement of small flat surface (100 x 100
mm). |
| |
|
|
| Icm
500 |
|
Manual
equipment for panel measurement (700 x 500 mm). |
| |
|
|
| Icm
3000 |
|
Automatic
measurement of panels (700 x 500 mm). |
| |
|
|
| Yamosa |
|
Semi
automatic collimated light or scattered ligth with manual optical
registration assisted by vision system and CCD cameras. |
| 
