|
| DIRASOL
29 |
- Standard emulsion for stickers. Combine the best characteristics of
the DIRASOL product range :
- fast degassing after sensitization,
- good dispersion,
- excellent mesh coating with a minimum number of layers,
- short exposure time,
- high definition and fineness,
- good strength to solvent,
- For 90 to 120 wires per cm² mesh size.
|
| DIRASOL
132 |
- Mono component photopolymer emulsion ready to use for the fast
makeup of graphical and industrial stencils :
- ultra short exposure time,
- excellent strength to inks and solvent,
- aqueous based,
- UV polymerization,
- For 43 to 150 wires per cm² mesh size.
|
| DIRASOL
902 |
- High end emulsion for products requesting high definition and high
fineness :
- Wide exposure window,
- Short exposure time,
- Compatible with all traditional solvent or UV inks.
- For 77 to 180 wires per cm² mesh size.
|
| DIRASOL
916 |
- Universal emulsion for quick makeup of stencils requesting important
strength :
- for solvent based graphical inks,
- for aqueous based inks,
- for conventional UV inks,
- for aqueous UV inks,
- The mix diazo / photopolymer allows a great fineness and a
definition close to capillary film.
- For 120 to 180 wires per cm² mesh size.
|
| DIRASOL
948 |
- High viscosity emulsion (48 %) specific to high thickness stencils :
- very high strength to solvent based inks,
- For 9 to 77 wires per cm² mesh size.
|
|
